• attachment:regulator_with_connector.png of kinect/Tutorials/Adding a Kinect to an iRobot Create

Attachment 'regulator_with_connector.png'

Download

regulator_with_connector.png

Attached Files

To refer to attachments on a page, use attachment:filename, as shown below in the list of files. Do NOT use the URL of the [get] link, since this is subject to change and can break easily.
  • [get | view] (2010-11-30 21:05:24, 1489.7 KB) [[attachment:create_cable_open.png]]
  • [get | view] (2010-11-30 22:49:09, 2066.6 KB) [[attachment:create_cable_soldered.png]]
  • [get | view] (2010-12-01 01:20:46, 4389.7 KB) [[attachment:create_cable_with_wires.png]]
  • [get | view] (2011-05-02 21:01:18, 63.4 KB) [[attachment:db25_create.jpg]]
  • [get | view] (2010-12-01 00:38:47, 2669.1 KB) [[attachment:full_assembly.png]]
  • [get | view] (2011-05-02 21:02:48, 521.4 KB) [[attachment:pigtail.jpg]]
  • [get | view] (2010-12-01 01:30:29, 1144.4 KB) [[attachment:powered_cable.png]]
  • [get | view] (2010-11-25 00:11:47, 4.0 KB) [[attachment:regulator.png]]
  • [get | view] (2010-11-25 00:46:30, 703.1 KB) [[attachment:regulator_board.png]]
  • [get | view] (2010-12-01 00:13:42, 2216.3 KB) [[attachment:regulator_with_connector.png]]
  • [get | view] (2010-12-01 00:17:41, 1852.1 KB) [[attachment:regulator_with_shrinkwrap.png]]
  • [get | view] (2010-11-30 07:34:21, 1194.5 KB) [[attachment:roostick.png]]
  • [get | view] (2010-11-30 22:12:20, 3000.5 KB) [[attachment:roostick_with_connector.png]]
  • [get | view] (2010-12-01 00:33:29, 1204.5 KB) [[attachment:soldered_wall_adapter.png]]
  • [get | view] (2010-12-01 00:29:23, 1237.1 KB) [[attachment:wall_adapter_cable.png]]
 All files | Selected Files: delete move to page copy to page

You are not allowed to attach a file to this page.

Except where otherwise noted, the ROS wiki is licensed under the
Creative Commons Attribution 3.0