About | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange

Only released in EOL distros:   fuerte groovy hydro indigo jade kinetic

Overview

This package contains a ROS driver node for IDS Imaging uEye cameras.

The driver node has been tested with the version 4.60 https://en.ids-imaging.com/download-ueye.html for USB cameras. Future versions should be ABI compatible, and therefore should work.

This package can be installed with apt-get. However, the IDS Imaging driver mentioned above must also be installed.

The driver node has been tested with the following cameras:

• UI-1225LE-C
• UI-124xLE-C
• UI-164xLE-C
• UI-222xSE-C (two cameras synchronized for stereo)
• UI-324xCP-C

Nodes

camera

ROS driver node for uEye cameras.

Published Topics

image_raw (sensor_msgs/Image)

• The raw image topic.

camera_info (sensor_msgs/CameraInfo)

• Calibration info for each image.

Services

set_camera_info (sensor_msgs/SetCameraInfo)

• Sets the calibration parameters saved to a file.

Parameters

~cameraId (int)

• Id of the camera to open. Zero for any.

~force_streaming (bool)

• Force camera to stream images. If false, streaming will stop if no nodes subscribe to the image topic.

~hardware_gamma (bool)

• Enable hardware gamma correction if the camera supports it.

~auto_exposure (bool)

• Enable auto-exposure time if the camera supports it.

~exposure_time (double)

• Exposure time in milliseconds if ~auto_exposure is false.

~zoom (int)

• Zoom level with global binning.

~frame_rate (double)

• Image stream rate. The node will not allow ~frame_rate to exceed the limits of the camera with the constraints of other parameters such as ~zoom and ~pixel_clock.

~pixel_clock (int)

• Pixel clock speed for USB in MHz.

~frame_id (string)

• The tf frame_id in the published message headers.

~auto_gain (bool)

• Enable automatic hardware gain if the camera supports it.

~gain_boost (bool)

• Enables constant hardware analog gain boost if the camera supports it.

~gain (int)

• Sets the image hardware gain if ~auto_gain is false.

framerate

Node that displays the actual rate of an image stream.

Subscribed Topics

image_raw (sensor_msgs/Image)

• The raw image topic.

Parameters

~topic (string)

• Topic name of the image stream to subscribe to.

Usage

To run stereo cameras

$ rosrun ueye stereo

You might want to lower resolution by setting the zoom parameter

$ rosrun ueye stereo _zoom:=2

In case there are multiple cameras connected, you can choose the cameras that will be used by specifying the camera ids.

$ rosrun ueye stereo _lCameraId:=1 _rCameraId:=3

Camera Calibration

The camera node supports calibration with the camera_calibration package.

There are tutorials on how to run the calibration tool for monocular and stereo cameras.