About | Support | Discussion Forum | Index | Service Status | Q&A answers.ros.org

ROS API

cob_trajectory_controller

The cob_trajectory_controller node takes in trajectory_msgs/JointTrajectory messages and converts this to velocity commands to the hardware driver.

Action Goal

joint_trajectory_action/goal (pr2_controllers_msgs/JointTrajectoryActionGoal)

• The goal describes the trajectory for the robot to follow.

Action Result

joint_trajectory_action/result (pr2_controllers_msgs/JointTrajectoryActionResult)

• empty

Action Feedback

joint_trajectory_action/feedback (pr2_controllers_msgs/JointTrajectoryActionFeedback)

• empty

Published Topics

/joint_states (sensor_msgs/JointState)

• Publishes the joint states of all modules.

command_vel (brics_actuator/JointVelocities)

• Publishes the velocity commands for the hardware driver.

Services

set_joint_velocity (cob_trajectory_controller/SetFloat)

• Sets the maximum velocity in joint space.

set_joint_acceleration (cob_trajectory_controller/SetFloat)

• Sets the maximum acceleration in joint space.

Parameters

~ptp_vel (double, default: Required)

• Maximum velocity in joint space.

~ptp_acc (double, default: Required)

• Maximum acceleration in joint space.

~max_error (double, default: Required)

• Maximum allowed deviation from trajectory before controller is stopped.