Using ROS 2? Check out the ROS 2 tf2 tutorials.
Many of the tf2 tutorials are available for both C++ and Python. The tutorials are streamlined to complete either the C++ track or the Python track. If you want to learn both C++ and Python, you should run through the tutorials once for C++ and once for Python.
Contents
Workspace Setup
If you have not yet created a workspace in which to complete the tutorials, click here for some brief instructions .
Show EOL distros:
Create a file named ~/tutorials.rosinstall with the following content:
- other: { local-name: workspace }To overlay on the ROS distro you are using:
rosinstall ~/tutorials /opt/ros/$ROS_DISTRO>> ~/tutorials.rosinstall
To use this workspace whenever you open a new terminal setup your ROS environment by typing:
source ~/tutorials/setup.bash
Sourcing this file adds ~/tutorials/workspace to your ROS_PACKAGE_PATH.
Any packages you create in that directory will be found by rospack.
An alternative to source your script file is to add it to your .bashrc, but remember that this will persist in your .bashrc into the future, and you can only have one environment setup. For more on what this is doing see this page
Create a catkin workspace like so:
$ source /opt/ros/$ROS_DISTRO/setup.bash $ mkdir -p ~/tutorial_ws/src $ cd ~/tutorial_ws $ catkin_init_workspace src $ catkin_make
And now source the setup file from the result-space, so that packages you add to this workspace's src folder will be findable by rospack, and the built binaries by rosrun and roslaunch:
$ source devel/setup.bash
Learning tf2
1. tf2/Tutorials/Introduction to tf2
- This tutorial will give you a good idea of what tf2 can do for you. It shows off some of the tf2 power in a multi-robot example using turtlesim. This also introduces using tf2_echo, view_frames, and rviz.
C++ |
Python |
|
|
Debugging tf2
Using sensor messages with tf2
Setting up your robot with tf2
- Setting up your robot using tf
This tutorial provides a guide to set up your robot to start using tf.
- Using the robot state publisher on your own robot
This tutorial explains how you can publish the state of your robot to tf, using the robot state publisher.
- Using urdf with robot_state_publisher
This tutorial gives a full example of a robot model with URDF that uses robot_state_publisher. First, we create the URDF model with all the necessary parts. Then we write a node which publishes the JointState and transforms. Finally, we run all the parts together.
Extending tf2
