Please ask about problems and questions regarding this tutorial on answers.ros.org. Don't forget to include in your question the link to this page, the versions of your OS & ROS, and also add appropriate tags.

Getting started with roswtf

Before you start this tutorial, please make sure your roscore is NOT running.

Checking your installation

roswtf examines your system to try and find problems. Let's try it out:

$ roscd
$ roswtf

You should see (detail of the output varies):

Stack: ros
================================================================================
Static checks summary:

No errors or warnings
================================================================================

Cannot communicate with master, ignoring graph checks

If your installation ran correctly you should output similar to the above. The output is telling you:

• "Stack: ros": roswtf uses whatever your current directory is to determine what checks it does. This is telling us that you started roswtf in the ros stack.

• "Static checks summary": this is a report on any filesystem issues. It's telling us that there were no errors.

• "Cannot communicate with master, ignoring graph checks": the roscore isn't running, so roswtf didn't do any online checks.

Trying it online

For this next step, we want a Master to be up, so go ahead and start a roscore.

Now, try running the same sequence again:

$ roscd
$ roswtf

You should see:

Stack: ros
================================================================================
Static checks summary:

No errors or warnings
================================================================================
Beginning tests of your ROS graph. These may take awhile...
analyzing graph...
... done analyzing graph
running graph rules...
... done running graph rules

Online checks summary:

Found 1 warning(s).
Warnings are things that may be just fine, but are sometimes at fault

WARNING The following node subscriptions are unconnected:
 * /rosout:
   * /rosout

roswtf did some online examination of your graph now that your roscore is running. Depending on how many ROS nodes you have running, this can take a long time to complete. As you can see, this time it produced a warning:

WARNING The following node subscriptions are unconnected:
 * /rosout:
   * /rosout

roswtf is warning you that the rosout node is subscribed to a topic that no one is publishing to. In this case, this is expected because nothing else is running, so we can ignore it.

Errors

roswtf will warn you about things that look suspicious but may be normal in your system. It can also report errors for problems that it knows are wrong.

For this part, we are going to set your ROS_PACKAGE_PATH to a bad value. We're also going to stop our roscore to simplify the output that you see.

$ roscd
$ ROS_PACKAGE_PATH=bad:$ROS_PACKAGE_PATH roswtf

This time we see:

Stack: ros
================================================================================
Static checks summary:

Found 1 error(s).

ERROR Not all paths in ROS_PACKAGE_PATH [bad] point to an existing directory: 
 * bad

================================================================================

Cannot communicate with master, ignoring graph checks

As you can see, roswtf now gives us an error about the ROS_PACKAGE_PATH setting.

There are many other types of problems that roswtf can find. If you find yourself stumped by a build or communication issue, try running it and seeing if it can point you in the right direction.

Now that you know how to use roswtf, take sometime to learn more about how ros.org is structured and navigating the wiki.